Improve Performance Wireless Sensor Network Localization using RSSI and AEMM
Abstract
Improve wireless sensor network localisation performance using RSSI and an advanced error minimisation method (AEMM). WSNs remain domain-specific and are typically deployed to support a single application. However, as WSN nodes become more powerful, it becomes increasingly important to investigate how multiple applications can share the same WSN infrastructure. Virtualisation is a technology that may allow for this sharing. The issues surrounding wireless sensor node localisation estimation are still being researched. There are a large number of Wireless Sensor Networks (WSNs) with limited computing, sensing, and energy capabilities. Localisation is one of the most important topics in wireless sensor networks (WSNs) because location information is typically useful for many applications. The locations of anchor nodes and the distances between neighbouring nodes are the primary data in a localisation process. The complexity and diversity of current and future wireless detector network operations drive this. Several single schemes have been proposed and studied for position estimation, each with advantages and limitations.
Nonetheless, current methods for evaluating the performance of wireless detector networks are heavily focused on a single private or objective evaluation. Accurate position information in a wireless detector network is critical for colourful arising operations (WSN). It is critical to reducing the goods of noisy distance measures to improve localisation accuracy. Existing works (RSSI) are detailed and critically evaluated, with a higher error rate using a set of scenario requirements. Our proposed method (AEMM) is critical for detecting and dealing with outliers in wireless sensor networks to achieve a low localisation error rate. The proposed method (AEMM) for localisation and positioning nodes in wireless sensor networks supported by IOT and discovering the appropriate position of several nodes addresses all of the issues in WSN.
Downloads
References
[2]. Yorke, Peter, Tim Wark, Raja Jurdak, Wen Hu, Philip Valencia, and Darren Moore. “Environmental wireless sensor networks.” Proceedings of the IEEE 98, no. 11 (2010): 1903-1917.
[3]. García-Hernández, Carlos F., Pablo H. Ibarguengoytia-Gonzalez, Joaquín García-Hernández, and Jesús A. Pérez-Díaz. “Wireless sensor networks and applications: a survey.” IJCSNS International Journal of Computer Science and Network Security 7, no. 3 (2007): 264-273.
[4]. Al-Turjman, Fadi M., Hossam S. Hassanein, and Mohamed Ibnkahla. “Optimised relay repositioning for wireless sensor networks applied in environmental applications.” In 2011 7th International Wireless Communications and Mobile Computing Conference, pp. 1860-1864. IEEE, 2011.
[5]. Kashyap, Ramgopal. “Applications of wireless sensor networks in healthcare.” In IoT and WSN applications for modern agricultural advancements: Emerging research and opportunities, pp. 8-40. IGI Global, 2020.
[6]. Saxena, Mohit, Puneet Gupta, and Bijendra Nath Jain. “Experimental analysis of RSSI-based location estimation in wireless sensor networks.” In 2008 3rd International Conference on Communication Systems Software and Middleware and Workshops (COMSWARE’08), pp. 503-510. IEEE, 2008.
[7]. Al Alawi, Raida. “RSSI based location estimation in wireless sensors networks.” In 2011 17th IEEE International Conference on Networks, pp. 118-122. IEEE, 2011.
[8]. Stella, M., Russo, M., & Begušić, D. (2012). RF Localization in Indoor Environments. Radio engineering, 21(2). International Journal of Advanced Smart Sensor Network Systems (IJASSN), Vol 12, No.1/2/3, July 2022
[9]. Ahmad, T., Li, X. J., Wenchao, J., & Ghaffar, A. (2020, September). Frugal Sensing: A Novel Approach of Mobile Sensor Network Localization based on Fuzzy-Logic. In Proceedings of the ACM MobiArch 2020 The 15th Workshop on Mobility in the Evolving Internet Architecture (pp. 8-15),2020.
[10]. Jing Cheng, Ya Li, and Qingyuan Xu. “An Anchor Node Selection Scheme for Improving RSS-Based Localisation in Wireless Sensor Network”, Hindawi Mobile Information Systems Volume 2022, Article ID 2611329, 12 pages,2022.
[11]. H. Ahmadi, F. Viani, A. Polo, and R. Bouallegue, “An improved anchor selection strategy for wireless localisation of WSN nodes” in Proceedings of the IEEE Symposium on Computers and Communication (ISCC), Messina, Italy, 2016.
[12]. E. Cheng, L. Wu, F. Yuan, C. Gao, and J. Yi, “Node selection algorithm for underwater acoustic sensor network based on particle swarm optimisation”, IEEE Access, vol. 7, pp. 164429 –164443, 2019.
[13]. Beom-Su Kim,1 HoSung Park,1 Kyong Hoon Kim,1 Daniel Godfrey,2 and Ki-Il Kim2, “A Survey on Real-Time Communications in Wireless Sensor Network”, Hindawi Wireless Communications and Mobile Computing Volume 2017, Article ID 1864847, 14 pages, 2017.
[14]. T. Bouchoucha and Z. Ding, “Anchor selection for topology inference and routing in wireless sensor networks”, Journal of Communications and Information Networks, vol. 5, no. 3, pp. 318 –323, 2020.
[15]. Mahdi, Muhammed Abaid, and Saad Talib Hasson. “A Contribution to the Role of the Wireless Sensors in the IoT Era.” Journal of Telecommunication, Electronic and Computer Engineering (JTEC) 9, no. 2-11, 1-6,2017.
[16]. S. V. R. K. Rao, 2M.Saritha Devi, 3A.R.Kishore, 4Praveen Kuma, “Wireless sensor Network based Industrial Automation using Internet of Things (IoT)”, International Journal of Advanced Trends in Computer Science and Engineering, Volume 7, No.6, November - December 2018.
[17]. A. Bahillo, S. Mazuelas, R. M. Lorenzo, P. Fernández, J. Prieto, R. J. Durán, and E. J. Abril, ‘‘Hybrid RSS-RTT localisation scheme for indoor wireless networks,’’ EURASIP J. Adv. Signal Process., vol. 2010, no. 1, pp. 1–12, Dec. 2010.
[18]. M. W. Khan, N. Salman, A. H. Kemp, and L. Mihaylova, ‘‘Localisation of sensor nodes with hybrid measurements in wireless sensor networks,’’ Sensors, vol. 16, no. 7, pp. 1–16, Jul. 2016.
[19]. K. Yu, ‘‘3-D localisation error analysis in wireless networks,’’ IEEE Trans. Wireless Commun., vol. 6, no. 10, pp. 3472–3481, Oct. 2007.
[20]. Y. Sun, Z.-P. Zhou, S.-L. Tang, X. K. Ding, J. Yin, and Q. Wan, ‘‘3D hybrid TOA-AOA source localisation using an active and a passive station,’’ in Proc. IEEE 13th Int. Conf. Signal Process. (ICSP), Nov, pp. 257–2602016.